|
Micron has both
control transformer accessories and
low voltage general purpose transformer accessories.
Primary Fuse Kit
In addition to factory installed primary fusing capability, Micron offers a primary fuse
kit for ImperiTRAN and ValuTRAN for field installation. The primary fuse kit includes a 2-pole class cc
fuse block, instructions, and all associated mounting and wiring hardware. Additionally, this fuse kit
will fit most competitors units. The primary fuse kit, when installed, will add a maximum of 11/16" to
the transformer "A" dimension and 1-15/16" to the "C" dimension. To order, call 800 664-4660 and
request catalog number FKTP-1001.
SafeTouch Terminal Covers
SafeTouch terminal Covers are optionally available for GlobalTRAN as well as other ImperviTRAN and ValuTRAN
transformers, and meet the fingersafe or touch-proof requirements for IEC specification 529 IP20 degree
specification for protection. Covers are available in kit form for the transformer, either with or without
secondary fuse clips. When installed, the covers prevent contact with current-carrying parts.
| Catalog No. |
Description |
TPTC-1001 |
Individual 4-terminal cover kit |
| TPTC-1002 |
Individual 6-terminal cover kit |
SafeTouch Fuse Block Cover Kits
New SafeTouch terminal covers are optionally available for GlobalTRAN as well as other ImperviTRAN and ValuTRAN
transformers for the primary fuse block. Featuring Micron's patented easy-open latch mechanism that allows the use of any small pointed object such as a small screwdriver or ball-point pen to release the cover for removal, the new design meets the IP20 fingersafe or touch-proof requirements for
IEC specification 529, preventing contact with current-carrying parts.
| Catalog No. |
Description |
TPTC-1006 |
Individual fuse block cover kit, 2-pole |
Wall Mounting Brackets
Wall mounting brackets are used to mount most 15 through 75 KVA and some 100 and 112.5 KVA Type 1-V and 3-V
transformers. This bracket allows for 6" clearance from the wall as recommended by Micron.
| Catalog No. |
Description |
WMB01MI |
Wall Mounting Bracket |
Weather Shield Kit
A weather shield kit consisting of a front and rear cover shield must be installed on all ventilated
dry-type distribution transformers when the unit is located outdoors. The shields protect the
transformer top ventilation openings against rain but allow for proper ventilation. Field installation
hardware is not required. Refer to specific transformer listing for selection of weather shield kit.
| Number |
Fits Frame Size(s) |
KVA Range |
| WS1OM |
808 |
10-15 |
| WS11M |
809.810.811 |
15-50 |
| WS12M |
812.813 |
50-100 |
| WS13M |
814 |
167 |
| WS30M |
909 |
7.5-15 |
| WS31M |
910.911.912 |
15-45 |
| WS32M |
913A. 914A. 915A |
45-112.5 |
| WS33M |
916 |
112.5-150 |
| WS34M |
917,918 |
150-300 |
| WS35M |
919,920 |
300-700 |
| WS36M |
922 |
500 (Non-linear) |
|
